Week 10: built the hardware part of the project

Title:

 Built the hardware part of the project

Objective:

1.  To built the hardware part of the project.
2.  To design appropriate wheelchair for the disabled person.

Procedure:

1. Buy the suggested motor for this project which is the power window motor. 
2. Get the wheelchair for reconstruct the design.
3. Bring the material needed for the hardware part to the welding shop for recombine the power window motor with the wheelchair.
4.  Then meet with Mr. Chen which the owners of the welding shop. Explain to him about my project and asked him to recombine the material.

Result:

1.   Mr. Chen gives opinion about this project which he says that the motor is not suitable to use because the motor can’t move if the load exceed than 100 kg. so this motor is not suitable for this wheelchair that the maximum load is 150 kg.
2. Mr. Chen also gives another solution for this project.

·         Use drill than use the power window motor. 

·         Use the motor that use in electric bicycle. 

·         Use AC power supply than use DC power supply. 

Conclusion:

This hardware can’t be done because the motor is not suitable for the project. For the better solution, I need to discuss this problem with my supervisor, Mr. Syazwan to get the better solution to solve this problem.